Rotary device

It is the auxiliary accessories that it attach to the forklift of hairpin. It is actuated by hidraulic control. With this device can turn in 90, 180, 240, 360 degrees, as haipain, as pincer, clamp, etc… For example, lnock over baskets for a side, can be combined with drawer other auxiliary devices such as clamps,…

Details

Side shift

As a stacker fork accessory, commanded hydraulically, it corrects the fork position without moving the machine. The fork side shift allow a displacement of it of uo to 100mm on each side. To keep within the limits more reduced the loss in capacity of load of the wheelbarrow, loss motivated for the lengthening of the…

Details

Shelving “Drive-in” system

Facilitate block stacking on shelf. The narrow part of these shelf is open so the wheelbarrow enters in a tunnel. The first pallet remains on the ground and the other position rest on beams of shelf; this protects the packaging against damage caused by crowding. In the “drive in” system, the stacker is make back…

Details

Shelf of pallets

 It is a type of construction of shelves spacially designed for taking pallets. It consist of a series of horizontal levels supported by vertical uprights. Indipending on the width of aech gap between uprights and the capacity of load allocated to these and beams, can be stowed one, two, three pallets. The stabiñity of the…

Details

Shelving for “coils”

For storing loads, especially heavy, such as, among others coils or rolls of rolled sheet bands. Is increased the safety of this type of shelves, through paviment superfices made from special materials and appropriate to the nature of the stored goods.

Shelving for cold rooms

They are constructed with a special quality of steel such that at a temperature of -36 degrees not became britle. Besides, the constitutent elements of such shelves received a aspecial treated, based on a primer and then on a point lacquer that it is resistant lo lower temperature. For those industries where working with corrosive…

Details